Surfing Terminology



Kayaking Inspired Gifts - Sales Help Support This Site




Surf kayaks can perform many manoevers on the face of beach surf. Touring kayaks are not well designed to perform these moves. But what the heck........




Introduction

Kayak Surfing ZoneSurfers have been taking to the waves in a variety of craft for centuries. The beginnings of board surfing is commonly known to have started in Hawaii. The beginnings of kayak surfing are shrouded in mystery.

Whilst Indians and Eskimos are typically sited as the forbears of canoeing and kayaking, it was the Polynesians that were first recorded to be surfing their war canoes in Captain Cook’s log.

Kayak Surfing as we now know it started to take shape with the advent of fiber glass canoes in the late 60s and has continued to progress alongside improvements in design and manufacture.

When out in the surf, a surfer will be looking to perform the most radical and functional ride in the most critical section of the wave.

The ride can be broken down into three sections; getting started or the take-off, the finish - end maneuver, and the bit in between - the ride. Other important aspects of surfing are the paddle out and the inevitable wipe-outs. Lets now take a look at these in turn.



Wipe Outs & the Bongo Slide

When everything goes horribly wrong and you lose control of your craft you will wipe out. Depending on the size and nature of the wave this can be very spectacular, even painful, and may well involve lots of unintentional capsizes and cartwheels. If you don't bail out of your boat, you'll find your self being pushed sideways and bounced in towards the beach. This motion is known as the bongo slide, and mastering this skill is the first step towards feeling truly comfortable in the surf.

To practice the bongo slide paddle out to where there are broken waves coming in at regular intervals and turn your craft so that it is sideways-on to the waves. As the water hits you, edge your craft into the wave and apply a low brace. The wave will push you sideways and bounce you towards the beach in the classic bongo slide position. If you lean forwards and apply the low brace in front of your hips the craft will tend to track in the direction in which the stern is pointing. If you lean back and apply the brace behind your hips the craft will track in the direction in which the bow is pointing. So by varying your body position you can control the angle of the craft as it slides ashore. Remember, as with all paddling techniques to practice on both sides. Once you feel confident at handling your craft in the broken water you can go out beyond the break line to the green waves.



The Take Off

Swells race towards the coast at incredible speeds, slowing down and increasing in size as they approach shallow water. Finally, when a swell passes over the ocean floor at a depth approximately 1.5 times its own height it will begin to break, expending much of its potential energy in the process. It is just before this point that the surfer, using self propulsion, can acquire the wave, or take-off. The take-off is therefore the entry point to a wave.

Straight Take Off

The easiest of the take-offs to perform. The paddler aligns them self at right angles to the approaching wave. As the wave comes up behind them they sprint forward to gain sufficient momentum to slide down the face of the wave. The steeper the wave at the moment of take of the easier the take-off is to perform.

Once on the wave the surfer now starts to perform the maneuvers that will constitute the ride.

If the paddler continues to run at right angles to the wave, the paddler will get a short ride as the wave will now break, and force the paddler to perform an end maneuver.

Angled Take-Off

Similar to the straight take-off, only this time the surfer is not at right angles to the approaching wave, but is instead angled to run down the face of the wave away from the shoulder.

This take off allows the surfer to move straight into a diagonal run.

Faded Take-Off

The last variation of the straight take-off is the faded take-off. This time the surfer angles the take-off, so as to move into the critical part of the wave. Enabling the surfer to correct poor initial positioning on the wave for the take off and to gain the power pocket. Once into the power pocket the surfer will need to perform a maneuver to turn away from the approaching shoulder.

Paddle Out Take-Off

The paddle out take-off allows the surfer to catch a wave at the most critical moment possible while paddling towards the break. This maneuver requires that the surfer is able to propel their craft at a reasonable speed whilst paddling out and as such is only performed by wave skis and kayaks.


The Ride

The technique of riding an unbroken wave by traveling along its length as well as running shore wards is fundamental to surfing in any craft. It is called a diagonal run.

Diagonal Run

Kayak Surf Diagonal RunGet the kayak surfing and then turn away from the break and tilt the craft with your hips into the wave to allow the edge (or rail), to grip the water. Twist the upper body towards the beach and apply a low-brace rudder on the down-wave (beach) side, pressing the stern into the wave to keep the nose down and pointing along the wave. With any luck you will be positioned on the wave in the power pocket with the broken wall of water (the shoulder) chasing behind you.

Once performing a diagonal run, you can alter the angle of the kayak to face down wave by leaning down the wave and asserting pressure on the low-brace rudder. To alter the angle of the kayak to face up wave lean the kayak up wave and release pressure from the low-brace rudder.

This technique forms the basics for all surfing maneuvers. To achieve the more complex maneuvers the low brace rudder may be applied on the up wave side and the kayak may need to be leaned to some quite impossible angles.

Trimming

Kayak Surf TrimingAs mentioned above the diagonal run is the basic surfing position from which all maneuvers can be performed. From this position the surfer planing along unbroken sections of a wave can trim the kayak to maintain or increase speed, which is essential in all maneuvers. This results in the diagonal run, not being quite a dead straight one.

Bottom Turn

Kayak Surf Bottom TurnUpon reaching the base of a wave the bottom turn produces the direction change and acceleration necessary to climb to the wave's crest. This maneuver will be performed immediately after a straight take-off, enabling the surfer to climb back up the wave into a position to perform a diagonal run. It can also be used to negotiate a fast or breaking section, allowing the surfer to surf down and around the white water and regain the shoulder beyond.

Top Turn

Kayak Surf Top TurnThe top turn is used to change direction after climbing to the uppermost section of a wave. When at the top of the wave the surfer is in danger of stalling and sliding off the back of the wave. To avoid this the surfer needs to lean forward to ensure that the kayak completes the maneuver. The top turn can also be used as a stall technique for regaining the power pocket.

Climbing and Dropping

kkayak Surf Climb and DropClimbing and dropping is the sequence of combining top and bottom turns. With each sequence the surfer increases speed to facilitate further maneuvers.

The Cut Back

Kayak Surf Cut BackThe cut back allows the surfer to change the direction of the diagonal run through 180 degrees. This is done by turning the kayak down the wave and continuing the turn until the kayak is facing the direction from where it came.

The cut back is usually performed upon reaching a slower section of a wave whereby the surfer changes his direction 180 degrees back towards the pursuing white water thereby regaining the pocket.

Roundhouse Cut Back

Kayak Surf RoundHouse Cut BackIn the description above the cut back was performed by the surfer traveling away from the shoulder. It can also be performed when planing towards the shoulder, so as to return to the position of the diagonal run.

When two cut back turns are performed in succession, the first towards the shoulder and the second away from the shoulder, this maneuver is known as a roundhouse cut back.

Tail Slash

Kayak Surf Tail SlashThis modification of the top turn is performed as the surfer travels steeply up the face of the wave, where upon the surfer performs a flamboyant turn through almost 180o where the tail of the kayak will slash across the top of the wave.

Lip Turn

Kayka Surf Lip TurnThis top turn is performed right on the lip (crest) of the wave, using the power of wave to turn the kayak.

Bouncer

Kayak Surf BouncerWhen running towards the shoulder, following a cut back or faded take off, the surfer can continue the run right into the broken section of the wave, using the force of the white water to turn the kayak and bounce back into the power pocket.

Side Slide

Kayak Surf Side Slide Up WaveWhilst planing a fast section of an unbroken wave the surfer can perform either a bottom or top turn and then releasing the forward rail causing the kayak to slide sideways in the original direction of the run. The side slide can be used as a means of stalling, thus allowing the shoulder to catch up.

Kayak Surf Side Slide Down WaveThe side slide can also be used as a means of dropping to the bottom of a wave. The boat control and technique required for a side slide is similar to that required by a floater.

Floaters (Roller-Coasters)

Kayak Surf FloaterOn occasions when racing along a wall, a section of white water will break in front of you. This necessitates turning in a long arc around the base of the white water (a big bottom top), or alternatively, climbing up and floating over the top of the foam before roller-coasting back down on to the unbroken water.

Re-Entry

Kayak Surf Re-EntryHaving ascended to the crest of a breaking wave it is possible to re-enter, turning back toward the base of the wave, using the crumbling/pitching lip as a power source to aid redirection: yet another functional method of keeping near the power pocket.

The re-entry can be used as a close-out maneuver when performed an approaching shoulder. Enabling the surfer to travel to the base of the wave away from the crashing white water as the last portion of the wave breaks.

Aerial

Kayak Surf AerialIn the right conditions it is possible to extend a re-entry to the point of leaving contact with the wave crest, allowing the surfer to turn in mid-air.

Like the re-entry the aerial can also be used as a close-out maneuver by the surfer using the power of the approaching shoulder to aid redirection to the base of the wave.

360

IKayak Surf 360n a kayak the 360 is performed as a flat spin. It is initiated by forcing the tail of the kayak to slide down the wave and around so as to cause the kayak to be planing backwards. Once this point is achieved the paddler then repeats the process, by forcing the nose of the kayak to slide down the wave and around, returning the kayak to a forward planing direction.

Kayak Surf 360 DelayThis maneuver may be deemed dangerous both for the kayaker and other water users, but it can be a flamboyant functional maneuver. A typical application of the 360 is as a stalling maneuver performed on the face of the wave whilst waiting for the shoulder, as an alternative to the cutback .

Other applications of the 360 are as part of a top turn, part of floater or as a regain 360.

Reverse 360

Kayak Surf 360 ReversThe 360 is initiated by sliding the tail of the kayak down the wave. With the reverse 360 the turn is initiated with the nose of the kayak turning down the wave. An all together harder maneuver.

Tube Riding

Kayak Surf Tube RidingThere are occasions, when riding steep-walled waves where the rider is confronted with a section that is impossible to negotiate, other than to trim underneath the throwing lip, and ride the very inside of the wave. Tube riding is sometimes referred to as getting covered.



End Maneuver

When the wave finally closes out and there is no more unbroken wave to plane along the surfer needs to finish the ride by performing an end maneuver. At times it may even be necessary to finish the ride prematurely, due to the particular circumstances at the time (obstacles such as rocks, piers or other water users).

The simplest way to pull off a wave, is to turn up wave and climb up and over the back before the whole thing collapses and becomes a heaving mass of soup.

On occasion it is not possible to exit over the top of the wave, forcing the rider to either straighten out and ride the white water, or punch through the wave - the punch out.

The alternative to pulling off the back of the wave is to straighten up and use the white water to perform an end maneuver unique to kayaks. The easiest of these maneuvers are the loop and pop-out.

Loop and Pop-Out

By continuing to lean forwards as the breaking wave lifts the back of the boat, the nose will dig in. As the wave continues forwards the tail will rise and as the wave passes the now vertical kayak the volume in the bow that is displaced under water will cause the kayak to shoot upwards. It is possible for the nose of the kayak to clear the water, when this happens it is called a sky rocket.

If the tail of the boat travels over the nose of the boat in the vertical plane, causing the paddler to land in a capsized position, then a loop has been performed. If however, the tail doesn't pass vertically over the nose of the kayak, but instead returns to its original position a pop-out has been performed.

It is possible through body positioning to control these end maneuvers. By leaning the body forwards you are more likely to perform a loop. If you lean back whilst vertical you are more likely to perform a pop-out. By the use of body rotation, when vertical, the kayak can be spun on its vertical axis, thus enabling the performance of dry loops and pirouettes.

Pirouette

Having forced the kayak into a vertical position, the kayak can be spun on its vertical axis. A 180 degree spin as part of a loop is termed a dry loop. A 360 degree spin or even a 720 degree spin is known as a pirouette.

Cart Wheel

The cart wheel is performed as a means of a forward and then reverse loop on the same wave. The trick with the cart wheel is to land the kayak after the first forward dry loop in front of the wave in a position where a reverse loop can then be performed.



Kayak Big Surf

Right of Way in the surf.


The red boat must give way. (from San Onefre Kayak Club/Adventure Sports, Ca.)


Of similar interest...

Kayak training, instruction, classes


Sp






Forum




EVEN THE BEST BOATERS CAN FIND THEMSELVES IN SERIOUS TROUBLE ON THE MILDEST OF DAYS ON THE WATER. PARTICIPATION IN THIS SPORT IS A STRENUOUS ACTIVITY. CONSULT YOUR PHYSICIAN BEFORE UNDERTAKING ANY SUCH ACTIVITY. PLEASE BE AWARE THAT EACH BOATER TAKES FULL RESPONSIBILITY FOR HIS OR HER OWN SAFETY, AND IS TOTALLY RESPONSIBLE FOR ASSESSING THE DANGER LEVEL AND ACCEPTING THE CONSEQUENCES OF PARTICIPATING IN THIS SPORT.


SeaKayak Chesapeake bay makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content on this website.This website is for informational purposes only. All of the information provided on this website is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, on this site.


Maps and map related products available on this website, including but not limited to imagery, data, and data sources are hereby specifically identified as being unsuitable for use in navigation. By using any of these products or services, you have agreed to these terms, whether or not the map or any other use is labeled “Not for Navigation”.

Copyright on original material by Sea Kayak Chesapeake Bay TM 2001 through 2019. All rights reserved.

S

k